In recent years, the demand for raw materials such as sand and stone aggregate for construction has increased dramatically. The investment of aggregate production line is the choice of many investors. The equipment price of the production line varies from millions to tens of millions. How to choose the production line effectively is the most concerned problem of many producers. Here is a brief introduction on how to configure the production line:

1、 Environmental protection
Environmental protection is a very strict problem. With the development of society, environmental protection cannot be slackened. The production of sand and stone aggregate will inevitably have an impact on the environment. To achieve zero pollution is the requirement of the qualified production line. The damage to the environment and the serious pollution to the sand and stone aggregate production line will surely be closed! Therefore, when selecting equipment for aggregate production line, the environmental protection performance of the equipment shall be considered. The equipment shall be ahead of the society to avoid being forced to stop production and change the machine in the middle. If not, the loss can be imagined, so the selection of aggregate production line equipment must be environmental protection.

2、 Energy saving type
The energy-saving type of aggregate must be considered. The energy-saving performance is the basic guarantee to maintain the normal operation of the production line. Just like people, we can't always consume our body's energy, so we can supplement energy in time to avoid problems. The purpose of the aggregate production line is to earn money. A little difference in energy-saving performance is a no for the production line that operates 24 hours a day Small expenses, so we can't be careless at all. And any industry has a saturation period, the competition is more and more fierce, the relatively cheap cost can make the later development of enterprises beneficial to the invincible position.

3、 Consumption of wearing parts
Those knowledgeable people know that in the production of sandstone and aggregate, the consumption of wearing parts is a big expense. If there is deviation in raw material analysis when selecting aggregate production line, and the selected equipment is not up-to-date, the consumption of wearing parts will make you doubt your life. The new worn parts can not work in three or two days and must be stopped from time to time for repair. In addition, wearing parts themselves are not cheap. It is estimated that the gut may repent at this time. Therefore, when choosing the equipment of aggregate production line, we must choose the appropriate crusher according to the raw materials. When choosing the crusher, we must choose the crusher with less wearing parts and relatively low cost of wearing parts.